Wooden Home Furniture
All designs

Bed Back Design Wooden: Headboards and Bed Back Walls

12 designs Beds Checked 9 Oct 2026

A good bed back design wooden panel does more work than any other surface in the bedroom. It is the first thing you see at the door, it protects the wall from oily heads, and it hides wires for lamps and chargers.

This gallery is all about the headboard and the wall behind it. You can fix a new bed back to the bed you already own, or run a panel across the whole wall. For complete beds, see our double bed design and wooden bed design pages.

Bed Back Design Wooden Simple Ideas

A plain wooden bed headboard design needs no carving. Grooves, a ledge or a change of grain give it character.

Bed back design wooden simple panel in teak veneer with horizontal V grooves

Thin V grooves every 4 in break up a plain teak veneer panel. It looks neat on any bed and is quick for a carpenter to make.

  • MaterialBWR ply, teak veneer
  • Size6 ft wide, 4 ft high
  • FitsQueen bed, any room

Carpenter tip: Press the veneer first, then route the grooves, so the edges inside each groove stay crisp.

Wooden bed headboard design in sheesham with a framed panel and a top ledge

A framed sheesham panel with a 5 in ledge on top holds a lamp and a glass of water. It saves you buying two side tables in a tight room.

  • MaterialSheesham, satin polish
  • Size5.5 ft wide, 3.5 ft high
  • Fits10 x 10 ft bedroom

Carpenter tip: Fix the ledge with hidden steel brackets; a glued ledge will tip under a heavy lamp.

Bed back wall design wooden in light oak laminate up to half wall height

An oak laminate panel runs wall to wall up to 4 ft, with paint above. It guards the wall from scuffs and costs far less than veneer.

  • MaterialBWR ply, oak laminate
  • Size10 ft wide, 4 ft high
  • FitsRented flat

Carpenter tip: Fix on battens with screws, not glue, so the panel comes off cleanly when you move out.

Wooden Bed Back Wall Design with Panels and Flutes

A full bed back wall makes the bed the focus of the room. If you want a wooden bed headboard design modern enough for a new flat, these flutes, slats and side panels are a good start.

Wooden bed back design modern with floor to ceiling fluted walnut panels

Fluted walnut panels run from skirting to ceiling behind the bed. The vertical lines make a 9 ft room feel taller.

  • MaterialMDF, walnut veneer
  • Size8 ft wide, full height
  • Fits11 x 12 ft bedroom

Carpenter tip: Leave a removable panel near the bed for switches and cables, or wiring repairs mean breaking flutes.

Double bed back side design with teak veneer side panels and wall lights

Two tall teak veneer side panels frame a painted centre, each carrying a slim wall light. The bed back side panels act as a frame for the bed.

  • MaterialBWR ply, teak veneer
  • Size10 ft wide, 8 ft high
  • FitsMaster bedroom

Carpenter tip: Mount the wall lights 18 to 20 in above the mattress top so they light a book, not your eyes.

Bed headboard design wooden with teak slats running up the wall and onto the ceiling

Slim teak slats climb the bed wall and turn onto the ceiling above the bed, making a cosy nook. Works best on a wall 10 ft or wider.

  • MaterialTeak strips, matte PU
  • Size6 ft wide strip
  • Fits12 x 13 ft bedroom

Carpenter tip: Fix slats on a black painted backing so the gaps read as shadow, not wall paint.

Double Bed Back Cushion Design

A cushioned bed back, often called a gaddi, is soft to lean on while you read or watch the phone in bed. Choose fabric that wipes or brushes clean.

Double bed headboard design with rectangular cushion blocks inside an oak frame

Six rectangular cushion blocks in beige fabric sit inside a light oak frame. A single stained block can be swapped without redoing the whole bed back.

  • MaterialOak veneer, beige fabric
  • Size6 ft wide, 4 ft high
  • FitsQueen bed, 11 x 11 ft

Carpenter tip: Make each block on a 9 mm ply base with keyhole slots so it lifts off a screw.

Double bed back gaddi design with tall channels and a sheesham border

Tall padded channels in rust fabric sit inside a dark sheesham border. The wood edge stops oil from hair staining the fabric sides.

  • MaterialSheesham, rust fabric
  • Size5.5 ft wide, 4.5 ft
  • Fits12 x 12 ft bedroom

Carpenter tip: Keep the wood border 3 in wide so it protects the fabric edges from wear.

Double bed back cushion design with tan leatherette strips on a teak panel

Horizontal tan leatherette strips are fixed on a teak panel, with wood showing between them. Leatherette wipes clean, which helps in dusty cities.

  • MaterialTeak ply, leatherette
  • Size6.5 ft wide, 4 ft high
  • FitsKing bed, master room

Carpenter tip: Keep leatherette away from direct afternoon sun, which dries and cracks it within a few seasons.

Carved Bed Back Design for a Classic Look

Carved backs suit traditional homes and large rooms. A CNC machine has made carved and jaali panels faster to cut these days.

Wooden carving bed design with a sheesham headboard and floral crest

A floral crest in deep sheesham carving tops a plain panel. Keeping the lower panel plain makes cleaning easier where pillows rub.

  • MaterialSheesham, walnut polish
  • Size6.5 ft wide, 5 ft high
  • FitsHigh ceiling room

Carpenter tip: Dust carving weekly with a soft paintbrush; a cloth snags and leaves lint in the cuts.

Modern wooden bed back design with a CNC jaali panel and warm backlight

A geometric jaali panel cut on CNC is set 2 in off the wall with LEDs behind it. At night the pattern glows softly around the bed.

  • MaterialMDF, teak PU
  • Size6 ft wide, 4 ft high
  • FitsModern flat bedroom

Carpenter tip: Use 18 mm MDF for the jaali and seal the cut edges well before PU, or they drink the paint.

Bed back design wooden with a teak relief panel of leafy branches

Shallow relief carving of leafy branches spreads across a wide teak panel. It feels traditional yet calm, and the low relief is easy to dust.

  • MaterialTeak, natural polish
  • Size7 ft wide, 4 ft high
  • Fits12 x 14 ft bedroom

Carpenter tip: Ask for relief no deeper than 6 mm on teak; deeper cuts trap dust and need more polish.

Choosing the Right Bed Back for Your Room

  • Small room: keep it low and light, like a half wall laminate panel.
  • Damp wall: fix the panel on battens with a 1 in air gap and use BWR ply.
  • Readers: a cushioned back with a wood frame is kinder on the back.
  • Storage needed: a head box with sliding shutters, as on our box bed design page.

If the bed faces a TV wall, match the wood tone with your bedroom TV unit so the room feels planned.

Fitting and Wiring a Bed Back Panel

  1. Mark the bed width and mattress top height on the wall with a pencil.
  2. Mark switch, lamp and charger points, then lay conduit before any wood goes up.
  3. Fix 1 in wooden battens every 16 to 18 in with plugs and screws.
  4. Screw the panel to the battens from behind or through grooves, so no screw heads show.
  5. Cut clean openings for switch plates and fit them flush with the panel face.

On an outside wall that gets rain, ask for a coat of waterproof primer on the wall first. A sofa cum bed in a study can take a smaller version of the same panel, see sofa cum bed designs.

Questions people ask

What is the right height for a double bed back design?

Keep the top of the headboard at about 3.5 to 4.5 ft from the floor. That leaves at least 18 in above the mattress to lean on. Full wall panels can go higher.

Can I add a new wooden bed headboard design to my old bed?

Yes. Most headboards can be fixed to the wall on battens and the old bed pushed against them. Remove the old headboard first if it is taller than the new one.

Which is better, a cushioned or a wooden bed back design?

Wood lasts longer and is easy to clean. Cushions are comfier to lean on. A mix, with cushions inside a wooden frame, gives you both.

Which double bed back design latest images are popular right now?

Fluted panels, slats that wrap onto the ceiling, wood side panels with wall lights, and soft cushion blocks in warm colours. Simple wood with hidden lights is more popular than heavy carving these days.

How do I clean a fabric double bed headboard design?

Vacuum it weekly with a brush nozzle and wipe spots at once with a damp cloth. Make cushion panels removable so they can go for dry cleaning once a year.

Keep browsing