Wooden Home Furniture
All designs

Glass Dining Table Design with Wooden Bases, Marble and Granite

14 designs Dining tables Checked 9 Oct 2026

A glass dining table design keeps a small dining space looking open, because the eye passes through the top to the floor below. Under every glass top in this gallery sits a wooden base or frame, made in teak, sheesham, sal or rubber wood, so the table feels warm and steady instead of cold.

We also show marble and granite tops on wooden frames. Stone is heavier and cooler to the touch than glass, and each type needs its own care. For all wood tables see our wooden dining table design gallery, and for chairs, folding tables and round tops see the main dining table design page.

Two rules matter most. Use only toughened glass, 10 mm for a 4 seater and 12 mm for a 6 seater or bigger. And seal any marble top before the first meal.

Wood Glass Dining Table Design

In a wood glass dining table design the base carries the look, since the top is see-through. Choose a base with a shape you like from every side, because guests will see all of it.

Glass dining table design with a clear top on a sheesham cross trestle base

Two X shaped sheesham trestles joined by a stretcher show their full grain under clear glass. It suits a hall where the table is seen from the sofa.

  • MaterialSheesham, honey polish
  • Size6 seater, 6 x 3 ft
  • FitsOpen hall, 11 ft wide

Carpenter tip: Glue clear rubber pads on top of each trestle so the glass rests on four soft points, not wood.

Dining table glass top design in bronze tint on walnut veneer V shaped legs

Bronze tinted glass hides crumbs and water marks better than clear glass, and the walnut V legs give a warm, grown up look for evening meals.

  • MaterialPly, walnut veneer
  • Size6 seater, 5.5 x 3 ft
  • FitsDining room 10 x 11 ft

Carpenter tip: Make each V leg from 25 mm BWR ply with veneer on all faces and 2 mm edge banding at the floor.

3D glass design for dining table with a frosted etched border on a teak frame

A 3D glass design for dining table tops uses a sandblasted geometric border with a clear centre, so plates sit on clear glass while the border adds pattern.

  • MaterialTeak, natural polish
  • Size6 seater, 6 x 3.25 ft
  • FitsFormal dining area

Carpenter tip: Get the etching done on the underside only; an etched top face traps oil and is hard to wipe.

Dining table design glass top in back painted white glass on a rubber wood frame

Back painted glass is solid white, so nothing shows through, yet it wipes as easily as clear glass. It looks fresh in a white and wood flat.

  • MaterialRubber wood, lacquer
  • Size4 seater, 4 x 2.5 ft
  • Fits2 BHK dining corner

Carpenter tip: Ask for factory lacquered glass; paint brushed onto the back locally peels once kitchen heat reaches it.

4 and 6 Seater Glass Dining Table Design

For four people, choose a rectangle near 3 x 4 ft or a round top of 3.5 ft. For six, a top near 3 x 6 ft is the usual size. These sets come with matching wooden chairs, so the whole corner looks planned.

Round dining table glass design for four on an interlocking teak plank pedestal

Two teak planks slotted into a cross make a strong pedestal with no corner legs, so four chairs fit around a 3.5 ft round glass top in a tight corner.

  • MaterialTeak, matte melamine
  • Size4 seater, 3.5 ft round
  • FitsSmall hall corner

Carpenter tip: Cut the cross slots tight and add a hidden bolt at the top so the planks never rock.

Glass dining table 4 seater design with grey tinted glass and rubber wood chairs

Grey glass on a walnut stained rubber wood frame with four matching chairs is a light, low cost set that a couple or small family can shift easily.

  • MaterialRubber wood, dark stain
  • Size4 seater, 4 x 3 ft
  • FitsRented flat

Carpenter tip: Check that the rubber wood is treated against borer; ask the maker for the treatment detail before buying.

6 seater glass dining table design on sheesham with a slatted lower shelf

A slatted sheesham shelf under the glass holds a jug, a fruit basket or table mats, which helps when the dining space has no sideboard.

  • MaterialSheesham, walnut polish
  • Size6 seater, 6 x 3 ft
  • FitsHall with no sideboard

Carpenter tip: Keep the shelf 10 in above the floor so knees clear it and a mop passes under.

Dining table glass design with an oval top on twin sal wood pedestals

An oval top with no sharp corners is safer for small children, and twin sal pedestals keep the ends free so a seventh chair fits on festival days.

  • MaterialSal, dark walnut stain
  • Size6 seater, 6 x 3.5 ft
  • FitsJoint family dining

Carpenter tip: Join the two pedestals with a hidden stretcher bar so the long glass top cannot sag in the middle.

Marble Dining Table Design

A marble design dining table feels cool and heavy and gives a rich look for a separate dining room. Marble is porous, so it needs sealing and quick wiping, but the wooden frame below can be anything from teak to sheesham.

Luxury marble dining table design with white Italian marble on a teak apron frame

White Italian marble with soft grey veins on a teak frame is the most asked for luxury top, best kept for a formal room where it is wiped after every meal.

  • MaterialTeak, natural PU
  • Size6 seater, 6.5 x 3.5 ft
  • FitsSeparate dining room

Carpenter tip: Lay an 18 mm BWR ply bed under the marble inside the frame; 18 mm marble cracks without full support.

Round marble dining table design in black marble on a sheesham tripod base

Black marble with white veins hides small stains better than white marble, and a three leg sheesham base never wobbles on an uneven floor.

  • MaterialSheesham, dark polish
  • Size5 seater, 4 ft round
  • FitsSquare dining 10 x 10 ft

Carpenter tip: Splay the three legs outward so their feet sit under the marble edge, or the heavy top can tip.

Dining table marble top design with beige marble set inside a teak wood border

A wide teak border around inset beige marble protects the stone edges from chipping and gives forearms a warm wooden rest.

  • MaterialTeak, beige marble
  • Size4 seater, 4 x 3 ft
  • FitsFlat dining nook

Carpenter tip: Leave a 2 mm gap between marble and teak border, filled with clear silicone, for wood movement.

Granite and Stone Dining Table Design

A granite dining table design takes hot vessels and hard use without marks. It is very heavy, so the wooden frame must be strong and the floor near the door must allow the slab to come in.

Granite dining table design with a black granite top on a sal wood frame

Polished black granite on a sal frame shrugs off hot kadhai and haldi, which suits a family that serves straight from the stove to the table.

  • MaterialSal, black granite
  • Size6 seater, 6 x 3 ft
  • FitsGround floor home

Carpenter tip: Use 3 x 3 in sal legs and a 4 in deep apron; a 20 mm granite slab is very heavy.

Dining table granite design for eight with a brown granite top on a teak base

Brown speckled granite hides crumbs and spills well, and a long teak base with six legs carries the weight for big family dinners.

  • MaterialTeak, brown granite
  • Size8 seater, 7.5 x 3.5 ft
  • FitsDining room 11 x 14 ft

Carpenter tip: Order the slab in two pieces with a tight joint over a centre rail if the stairs are narrow.

Dining table stone design with a thin sintered stone top on slim teak legs

Sintered stone is thin and much lighter than granite, so a slim teak frame can carry it. It suits upper floor flats where a granite slab is hard to bring in.

  • MaterialTeak, sintered stone
  • Size6 seater, 6 x 3 ft
  • FitsHigh floor flat

Carpenter tip: Bond the 12 mm stone to a 12 mm ply sheet before fixing so the thin slab does not crack.

Toughened Glass and Marble Care

  • Glass: only toughened glass, never plain float glass. Ask for polished or bevelled edges and rounded corners of about 20 mm radius.
  • Glass on wood: rest the glass on clear rubber or silicone pads, never straight on wood. Wood moves in the monsoon, and a hard spot can crack the glass.
  • Sealing marble: apply a stone sealer before first use and again every six months. Test it by dropping water on the top; if it darkens, reseal.
  • Stains: wipe lemon, tea, pickle oil and haldi at once. Use only mild soap on marble, since acid cleaners etch the polish.
  • The wooden frame: keep it 2 to 3 in from damp walls and have the polish on a solid wood base redone every year or two. See our wooden furniture care guide.

Questions people ask

What thickness is right for a dining table glass top design?

Use 10 mm toughened glass for a 4 seater and 12 mm for a 6 seater or larger. Thinner glass flexes between supports and feels cheap. Always ask for polished edges and rounded corners.

Is a 6 seater glass dining table design safe with children at home?

Yes, if the glass is toughened, 12 mm thick and has rounded corners. Toughened glass breaks into small blunt pieces instead of sharp shards. An oval or round top removes corners altogether.

Which dining table design wooden glass top is easiest to clean?

A clear or tinted glass top laid flat on a wooden base, with no inset gap, is easiest. Crumbs collect where glass sits inside a frame. Clean it with a moist cloth and dry it straight after with soft cotton so no streaks stay.

Is a marble dining table design good for daily Indian meals?

It works if you seal it and wipe spills at once, since marble soaks up lemon, oil and haldi. Black or dark marble hides marks better than white. If you want no upkeep, granite is the safer stone.

Granite or marble: which dining table marble top design lasts longer?

Granite is harder and resists heat, scratches and stains, so it lasts longer with less care. Marble is softer and etches with acids, but many people prefer its veins and finer look.

Keep browsing