Double Bed Design: Modern, Stylish and Simple Ideas
24 designs Beds Checked 9 Oct 2026
A good double bed design starts with two numbers: the mattress size and the room size. Get those right and any style will work. Get them wrong and you will bump your knee on the corner every morning.
These double bed design photos are sorted by style, from simple frames for a rented flat to padded and low platform beds. Every bed here takes a standard 5 x 6.25 ft double mattress. Each picture lists the wood or board, the main size and the room it suits, plus a tip for your carpenter.
Have a big master room? Our king size bed design gallery covers the larger mattresses. To compare woods and joinery in detail, see our wooden bed design page, and for storage under the mattress, see box bed designs.
Modern Double Bed Design
A modern double bed design keeps lines clean, legs slim and the headboard low. These suit flats with plain walls and bedrooms of 10 x 11 ft or more.

Matte grey laminate hides fingerprints, and the slatted headboard in oak tone adds warmth without any carving. A good pick for a young couple in a new flat.
- MaterialBWR ply, grey laminate
- Size5 x 6.25 ft, double
- Fits10 x 11 ft bedroom
Carpenter tip: Screw the slats onto a 12 mm back board from behind so no screw heads show in front.

Tapered legs lift the frame 7 in off the floor, so the room looks bigger and the maid can mop underneath. The cane panel lets the wall colour show through.
- MaterialTeak, natural polish
- Size5 x 6.25 ft, double
- Fits10 x 10 ft bedroom
Carpenter tip: Cane slackens in humid months, so set it in a removable frame that can be re-caned later.

The headboard leans back about 10 degrees, so your back rests at a natural angle while reading. Sagwan veneer gives real teak grain on a lighter ply frame.
- MaterialBWR ply, sagwan veneer
- Size5 x 6.25 ft, double
- Fits10 x 12 ft bedroom
Carpenter tip: Cut the angled headboard brackets from solid sal and bolt them to the side rails, not to the wall.
Stylish Double Bed Design Photos
Stylish beds rely on one bold detail, such as a curve, a cut pattern or a colour, with the rest of the room kept plain.

The headboard bends forward at both ends and wraps around the pillows, which feels cosy and blocks the breeze from a side window. Light oak veneer keeps the curve gentle on the eye.
- MaterialPly, light oak veneer
- Size5 x 6.25 ft, double
- Fits11 x 12 ft bedroom
Carpenter tip: Bend the curve from 4 mm flexible ply in layers over a jig, then lay the veneer on top.

A geometric jali cut through solid sheesham lets the wall colour peep through. Paint the wall behind in a deep shade so the pattern shows up at night under a lamp.
- MaterialSheesham, dark polish
- Size5 x 6.25 ft, double
- Fits10 x 12 ft bedroom
Carpenter tip: Cut the jali on a CNC from 25 mm seasoned sheesham and sand every opening before polishing.

A scalloped top edge and powder blue matte PU give a soft, cheerful look for a first flat or a teenager's room. Light oak legs keep the whole bed looking airy.
- MaterialMDF, powder blue PU
- Size5 x 6.25 ft, double
- Fits10 x 11 ft bedroom
Carpenter tip: Cut the scallops on a CNC so every curve matches, and round the edges before the PU coat.
Simple Double Bed Design
A simple double bed design is a plain frame, a low headboard and nothing extra. It is quick to make, easy to shift and kind to the budget.

A flat sheesham headboard and four square legs, nothing more. The strong grain does the decorating, so keep the bedding plain and let the wood show.
- MaterialSheesham, honey polish
- Size5 x 6.25 ft, double
- Fits10 x 11 ft bedroom
Carpenter tip: Ask for mortise and tenon corners with bed bolts, not only screws, so the frame never creaks.

This light frame opens into five parts with bed bolts, so it climbs stairs and fits in a lift on shifting day. Good for renters who move every few years.
- MaterialRubber wood, clear coat
- Size5 x 6.25 ft, double
- FitsRented flat
Carpenter tip: Rubber wood needs borer treatment; ask for treated, kiln dried stock and check the end grain.

A thin ledge on top of the headboard holds a phone, glasses and water bottle. Light oak laminate keeps a small guest room bright.
- MaterialBWR ply, oak laminate
- Size5 x 6.25 ft, double
- FitsGuest room, 10 x 10 ft
Carpenter tip: Run 2 mm PVC edge banding on every ply edge, mainly the bottom rail that gets mopped daily.

Round spindles in the headboard give a homely look that suits a parents' room. Mango wood keeps the cost lower than sheesham or teak.
- MaterialMango wood, walnut stain
- Size5 x 6.25 ft, double
- Fits11 x 12 ft bedroom
Carpenter tip: Insist on anti-borer treatment for mango wood and seal the underside of the frame as well.
Double Beds with Upholstered Headboards
A padded headboard, the soft sirana, is comfortable to lean on while reading. More ideas are on our bed back design page.

Vertical channels in teal velvet sit inside a walnut frame. Velvet feels rich but needs a weekly brush to keep dust out of the pile.
- MaterialPly, teal velvet
- Size5 x 6.25 ft, double
- Fits12 x 12 ft bedroom
Carpenter tip: Use 40 density foam in the channels; softer foam flattens within a year of leaning.

Leatherette wipes clean with a damp cloth, which helps in dusty cities. Diamond buttons give a classic look on a wenge frame.
- MaterialPly, grey leatherette
- Size5 x 6.25 ft, double
- FitsAC bedroom, 11 x 12 ft
Carpenter tip: Leatherette cracks in strong sun; keep this bed away from a west window.

Three square mustard cushions sit inside a sheesham frame and lift off for washing. You get soft support with the look of real wood.
- MaterialSheesham, mustard fabric
- Size5 x 6.25 ft, double
- Fits10 x 12 ft bedroom
Carpenter tip: Hang each cushion panel on keyhole hooks so it comes off for dry cleaning in seconds.
Double Bed with Side Table Design and Back Panels
Planning the bed, side tables and back panel together uses the whole wall and keeps pillows off the paint.

One wide headboard holds two floating side tables, so you need no separate bedside units. Matte white PU keeps a north facing room bright.
- MaterialMDF, white matte PU
- Size5 x 6.25 ft + sides
- Fits12 x 12 ft bedroom
Carpenter tip: PU on MDF chips at sharp corners, so round every corner to about 10 mm before painting.

A grooved oak veneer panel covers the wall behind the bed up to 4 ft, and two floating drawer units hang from it on either side. The floor stays clear for easy mopping.
- MaterialBWR ply, oak veneer
- Size5 x 6.25 ft + panel
- Fits11 x 12 ft bedroom
Carpenter tip: Hang the floating side tables on a steel cleat screwed into the wall, never on the panel alone.

The headboard runs past the bed on both sides and ends in two tier open shelves, so the side tables are part of the bed. A water bottle and glasses sit right at pillow height.
- MaterialSheesham, honey polish
- Size5 x 6.25 ft, 8 ft wide
- Fits11 x 12 ft bedroom
Carpenter tip: Keep the top shelf level with the mattress top, about 22 in, so you can reach it lying down.

A painted MDF wainscot panel in sage green rises to 4 ft behind a plain teak bed, with two small round teak side tables. The panel saves the wall paint from oily pillow marks.
- MaterialMDF PU panel, teak bed
- Size5 x 6.25 ft, double
- Fits10 x 12 ft bedroom
Carpenter tip: Leave a 2 in gap between the panel bottom and the floor, or mopping water will swell the MDF.
Low and Floating Double Bed Design
Low and floating beds keep the frame close to the floor or hide the base, so the room looks bigger.

The base sits 4 in back from the edge, so the bed seems to float. A warm LED strip under it doubles as a night light for late trips to the bathroom.
- MaterialBWR ply, walnut veneer
- Size5 x 6.25 ft, double
- Fits11 x 12 ft bedroom
Carpenter tip: Put the 12 V LED strip in an aluminium profile and keep the driver behind a small removable panel.

The mattress sits on wide sal slats just 8 in off the floor, which gives a calm, open look under a low ceiling. Air moves between the slats and keeps the mattress fresh.
- MaterialSal, clear matte coat
- Size5 x 6.25 ft, double
- Fits10 x 10 ft bedroom
Carpenter tip: Low beds are hard on the knees, so for elders raise the same frame to the usual 14 to 18 in.

A wide platform leaves an 8 in ledge around the mattress, which works as a seat and a spot for a cup of tea. Ash grey laminate hides dust on this low surface.
- MaterialBWR ply, ash laminate
- Size5 x 6.25 ft + 8 in ledge
- Fits11 x 12 ft bedroom
Carpenter tip: Round the ledge corners to about 50 mm and edge band them, since shins hit this edge at night.
Latest Double Bed Design and New Stylish Ideas
The latest double bed design trends mix wood with fluted panels, rounded shapes and hidden light.

Half-round flutes catch light from the side and give depth without carving. Cocoa PU suits a room with warm white light.
- MaterialMDF, cocoa matte PU
- Size5 x 6.25 ft, double
- Fits11 x 12 ft bedroom
Carpenter tip: Order ready fluted MDF panels and fill the joints before PU, or the seams will show.

An oak laminate frame meets a high gloss white acrylic headboard band. Two tones make a plain bed look new at a modest cost.
- MaterialBWR ply, oak and acrylic
- Size5 x 6.25 ft, double
- Fits10 x 12 ft bedroom
Carpenter tip: Acrylic scratches easily; peel its protective film only after the bed is fully fitted.

A shallow niche along the headboard top hides a warm LED, so you get soft reading light without a lamp. It suits a room with low ceiling lights.
- MaterialBWR ply, walnut laminate
- Size5 x 6.25 ft, double
- Fits10 x 11 ft bedroom
Carpenter tip: Use 3000 K LEDs in the niche and a dimmer switch near the bed.

Charcoal laminate with slim brass capped legs looks sharp against a pale wall. A dark finish hides marks in a busy home.
- MaterialBWR ply, charcoal mica
- Size5 x 6.25 ft, double
- Fits11 x 11 ft bedroom
Carpenter tip: Fix the legs with steel plates and bolts, since slim legs alone cannot take side load.
What to Tell Your Carpenter
- Mattress size and thickness: a 6 in and an 8 in mattress need different rail heights.
- Base: 18 mm ply boards or wooden slats with gaps for air. Slats keep the mattress fresh in monsoon.
- Joints: bed bolts at the corners so the bed can be opened when you shift.
- Board: BWR ply in humid cities, with PVC edge banding on all edges.
- Switches: two points near the headboard for phones and lamps.
Solid wood, veneer, padded headboards and carved or cut panels all add to the cost. Need storage under the mattress? Look at box beds. Not sure which timber or board to pick? Our guide to choosing wood explains each one.
Questions people ask
What size is a standard double bed design in India?
A standard double mattress is 5 x 6.25 ft (60 x 75 in). The frame around it comes to about 5.5 x 6.75 ft.
Which bedroom double bed design suits a small room?
Pick a low headboard, open legs and a light laminate or natural wood finish. A bed without a footboard saves about 3 in of length.
Which wooden double bed design lasts longest?
Teak or well seasoned sheesham with mortise and tenon joints and bed bolts lasts for decades. A plywood bed in BWR ply with laminate is lighter and fine for 10 to 15 years with care.
How high should a modern double bed design be?
Keep the frame top 14 to 18 in from the floor. With an 8 in mattress you sit at about 22 to 24 in. Low platform beds look modern but are harder for elders to get up from.
Is a simple double bed design without storage a good idea?
Yes, if you have a wardrobe and loft for quilts. Open legs let you mop under the bed and keep air moving, which stops musty smells in monsoon. See wooden furniture care for cleaning tips.
What is golden patti in double bed design?
It is a thin brass or gold coloured strip set into the edges of the headboard and footboard. Ask for real brass set flush in a groove, since cheap stuck-on strips lift in humid weather.





