Wooden Box Bed Design: Storage Beds for Indian Homes
16 designs Beds Checked 9 Oct 2026
A wooden box bed design turns the space under your mattress into a big trunk for quilts, extra pillows and winter clothes. In a small flat with no store room, that space is gold.
The trick is choosing how you will open it. Lift-up lids are cheap and simple, hydraulic beds lift the whole base with little effort, and side drawers work when the bed is pushed against a wall. These box double bed design photos show all three, with the inside depth and hardware to ask for. For frame sizes, see our double bed design page.
Box Khat Design Wooden Bed
The classic box khat has lids you lift by hand, held up by a stay. Split lids are lighter to lift than one big lid, so ask for two or four.

Two split lids mean you lift only half the mattress at a time. The plain sheesham headboard keeps this box bed design wooden and simple.
- MaterialSheesham, natural polish
- Size5 x 6.25 ft, queen
- Fits10 x 11 ft bedroom
Carpenter tip: Fit a folding lid stay on each lid so it stays up while you search inside.

The headboard is a shallow box with two sliding shutters for medicines, chargers and papers. Add it to a box khat and you have storage at both ends.
- MaterialTeak, honey polish
- Size5 x 6.25 ft, queen
- Fits11 x 12 ft bedroom
Carpenter tip: Keep the head box 6 to 8 in deep so it does not push the pillow too far forward.

A pair of peacocks is carved into the sheesham headboard of this box bed, while the base stays plain for easy dusting. Best in a large, traditional room.
- MaterialSheesham, walnut polish
- Size6 x 6.5 ft, king
- Fits13 x 14 ft master room
Carpenter tip: Order carving as a separate panel set into the frame, so it can be repolished on its own.

BWR ply with teak finish laminate keeps this bed light and affordable. Four smaller lids are easy for anyone in the house to lift.
- MaterialBWR ply, teak laminate
- Size5 x 6.25 ft, queen
- FitsRented or small flat
Carpenter tip: Use 18 mm ply for the lids and 2 mm edge banding, or the lids will sag and swell.
Hydraulic Wooden Box Bed Design New Model
A hydraulic (gas lift) bed raises the whole mattress base on two pistons. It opens from the foot or the side, and the full box is open in one go.

The whole base rises from the foot on two gas pistons, showing one open box underneath. A foot lift suits a bed with space on both sides.
- MaterialBWR ply, walnut laminate
- Size5 x 6.25 ft, queen
- Fits11 x 12 ft bedroom
Carpenter tip: Match the piston rating to your mattress weight; a heavy coir mattress needs stronger lifts.

This bed opens from the side, which helps when the foot faces a wardrobe. Oak veneer gives a natural wood look without solid wood weight.
- MaterialBWR ply, oak veneer
- Size5 x 6.25 ft, queen
- Fits10 x 10 ft bedroom
Carpenter tip: Side lifts need about 3 ft of clear space beside the bed to open fully.

A king size hydraulic bed holds as much as a small almirah. The grey padded headboard sits on a wenge laminate frame.
- MaterialPly, wenge and fabric
- Size6 x 6.5 ft, king
- Fits12 x 14 ft bedroom
Carpenter tip: Split a king base into two hydraulic halves; one large lid is hard to lift and strains pistons.

A fluted teak veneer headboard and a slim plinth give this storage bed a modern look. The plinth lifts the box clear of mop water.
- MaterialBWR ply, teak veneer
- Size5 x 6.25 ft, queen
- Fits11 x 11 ft bedroom
Carpenter tip: Raise the box on a 2 in recessed plinth and seal its bottom edge with PVC banding.
Double Bed Design with Box: Inside Layouts
Inside depth is usually 10 to 12 in, enough for folded quilts and soft bags. Dividers keep things from sliding into one heap.

Two cross dividers make four bays, so winter quilts, spare pillows and bedsheets each get a place. A light laminate lining shows what is inside.
- MaterialBWR ply, white laminate
- Size10 to 12 in deep
- FitsJoint family storage
Carpenter tip: Line the inside with light laminate and add two air vents at the back to stop musty smells.

A single bed with a box base stores school things, toys and spare bedding in a small room. Rubber wood keeps it light to move.
- MaterialRubber wood, white PU
- Size3 x 6.25 ft, single
- FitsChild's room, 9 x 9 ft
Carpenter tip: Use soft-close lid stays on a child's bed so the lid never slams on fingers.

Cane panels on the sides let air move through the box, so stored cotton does not smell damp in monsoon. Useful in coastal homes.
- MaterialTeak, cane, matte PU
- Size5 x 6.25 ft, queen
- FitsCoastal city bedroom
Carpenter tip: Back the cane with fine mesh from inside so dust and insects stay out of the box.

One lid at the foot rises on a small gas stay and stays open on its own. Mango wood gives the warm look of solid wood at a lower cost.
- MaterialMango wood, honey stain
- Size5 x 6.25 ft, queen
- Fits10 x 12 ft bedroom
Carpenter tip: Treat mango wood against borer inside the box too, since stored cloth hides early damage.
Double Bed Box Design with Side Drawers
Drawers suit beds that touch a wall on one side, or homes where elders find lids heavy. Use telescopic channels so drawers run smoothly when full.

Two deep drawers on each side open without moving the mattress. Plan at least 2.5 ft of space beside the bed to pull them out.
- MaterialBWR ply, walnut laminate
- Size5 x 6.25 ft, queen
- Fits11 x 12 ft bedroom
Carpenter tip: Use full extension telescopic channels rated for 35 kg so loaded drawers do not drop.

Two wide drawers at the foot end work when both sides of the bed are tight against a wall and a wardrobe.
- MaterialSheesham, satin polish
- Size5 x 6.25 ft, queen
- FitsNarrow 9 x 11 ft room
Carpenter tip: Keep drawer fronts 8 in high and fix a stopper so they never come fully out.

Hydraulic storage in the middle plus two slim drawers on each side for daily use. Good for a joint family with lots of bedding.
- MaterialBWR ply, oak and white
- Size6 x 6.5 ft, king
- Fits13 x 14 ft master room
Carpenter tip: Keep side drawers 18 in deep so they do not clash with the hydraulic box behind them.

Handleless drawers with a recessed profile keep shins safe at night and give a clean look. White PU brightens a dim room.
- MaterialMDF, white matte PU
- Size5 x 6.25 ft, queen
- Fits10 x 11 ft bedroom
Carpenter tip: Use an aluminium profile handle along the top edge; PU grooves chip with daily use.
Keep Stored Things Dry and Safe
- Use BWR ply at least for the bottom board and seal all edges with PVC banding.
- Lift the box 1 to 2 in off the floor on a plinth so wet mopping does not soak it.
- Store bedding in cotton bags with a few neem leaves or naphthalene balls, never damp.
- Open the box once a month in monsoon to let air in.
- Look for powder or mud lines at the corners; call pest control at the first sign.
More cleaning tips are in our wooden furniture care guide. For a carved headboard on your box bed, browse our bed back designs.
Questions people ask
How deep is the storage in a wooden box bed design?
Most box beds have 10 to 12 in of usable depth inside. Drawers are shallower, about 7 to 9 in, because the channels and base take space.
Is a hydraulic bed better than a box khat with lids?
A hydraulic bed opens the whole box with little effort and is easier for one person. Lids are cheaper and have no parts to wear out. Pistons may need replacing after several years.
Can I get a wooden box bed design new model in solid wood?
Yes, but solid wood box beds are heavy. Many carpenters build the frame and headboard in teak or sheesham and the storage box in BWR ply to save weight and cost.
Does a double bed design with storage get damp in monsoon?
It can if the box sits on a wet floor or the bedding goes in damp. Use a plinth, line the inside with laminate and add small air vents at the back.
Which double bed box design is easiest for elders?
Side drawers or a hydraulic lift with a light gas spring are easiest. Avoid one big lid, which needs a strong pull and two hands.





