Wooden Home Furniture
All designs

Kids Wardrobe Design Ideas for Girls, Boys and Baby Rooms

12 designs Wardrobes and almirahs Checked 9 Oct 2026

A good kids wardrobe design grows with the child: low rails and open bins for a five year old, then shelves, drawers and a mirror for a teenager. The carcass can stay the same for ten years if the inside is planned to change.

Here are 12 kids room wardrobe designs, from a small almirah for a newborn to a study and wardrobe wall for a teen. Each card lists the board, size, the room it fits and a safety or making tip for your carpenter.

Children pull on doors, climb shelves and stick things on every surface. So the rules here are simple: rounded edges, soft-close hinges, no loose glass, an anti-tip bracket on every tall unit, and a finish that wipes clean.

Kids Room Wardrobe Design

These kids bedroom wardrobe designs suit a shared room or a first own room. A laminate kids wardrobe design is the practical choice, because crayon and sticky fingers wipe off easily.

Kids room wardrobe design with mint and white laminate doors and a low hanging rail

One shutter opens to a hanging rail set at 3 ft, so a young child can pick school uniforms alone. The rail moves up later as the child grows.

  • MaterialBWR ply, mint laminate
  • Size4.5 x 7 ft, 3 doors
  • Fits10 x 10 ft kids room

Carpenter tip: Drill a column of holes for the rail brackets at 3 in spacing so the rod can move up without new screws.

Kids sliding wardrobe design with pastel yellow and white door panels in a kids bedroom

Sliding doors save the swing space a hinged door needs, which matters in a narrow kids room with a bed close to the wardrobe. Pastel yellow panels keep it cheerful.

  • MaterialBWR ply, matte laminate
  • Size6 x 7 ft, 25 in deep
  • FitsNarrow 9 x 11 ft room

Carpenter tip: Use a soft-close sliding track with end stoppers, so small fingers are not pinched when doors meet the frame.

Kids wardrobe design in birch plywood with open lower cubbies and fabric toy bins

The lower half has open cubbies with fabric bins for toys, and the upper half has closed shutters for clothes. Kids learn to tidy up when the bins sit at their height.

  • MaterialBirch ply, clear lacquer
  • Size4 x 6 ft, 20 in deep
  • FitsPlayroom or kids room

Carpenter tip: Round over all exposed ply edges with a router and sand them smooth, since birch edges splinter if left sharp.

Kids Wardrobe Design for Girls

Girls wardrobe design ideas from a small baby girl almirah design to a teenage girl wardrobe design with a mirror. Soft colours work, but pick one that will still look right at age fifteen.

Baby girl almirah design in blush pink PU with arched door panels and gold knobs

A small two door almirah with arched panels holds frocks, nappies and blankets at an easy height for parents. Later it moves to the corner as a toy or book almirah.

  • MaterialMDF, blush pink PU
  • Size3 x 5 ft, 18 in deep
  • FitsNursery corner

Carpenter tip: Use lead-free PU paint and let it air out for two weeks before the nursery is used.

Teenage girl wardrobe design in lilac laminate with a mirror door and dressing ledge

A full length mirror shutter and a small dressing ledge with warm lights turn one corner into a getting-ready spot. It suits a teen who wants her room to feel grown up.

  • MaterialBWR ply, lilac laminate
  • Size6 x 7 ft + 18 in ledge
  • FitsTeen room, 10 x 12 ft

Carpenter tip: Fix the mirror with mirror clips and adhesive on a ply backing, never adhesive alone, so it stays safe if a door is slammed.

Girl room wardrobe design with peach fluted shutters and brass profile handles

Fluted panels in soft peach PU add texture without any printed pattern that a child will outgrow. A smart choice for girls aged six to sixteen.

  • MaterialMDF, peach PU, fluted
  • Size5 x 7 ft + 2 ft loft
  • FitsGirls room, 10 ft high

Carpenter tip: Order fluted MDF panels pre-primed and fill each groove end carefully, as raw MDF grooves soak up paint unevenly.

Boy Kids Wardrobe Design

Boys rooms need tough doors, open space for sports gear and drawers that take rough handling. These boy kids almirah designs use strong colours on hard wearing finishes.

Boy kids wardrobe design in navy and white laminate with an open display shelf

Navy shutters with a white frame and an open centre shelf for trophies, a football or a cricket helmet. The four drawers below take socks, belts and school bags.

  • MaterialBWR ply, navy laminate
  • Size5 x 7 ft, 4 drawers
  • FitsBoys room, 10 x 11 ft

Carpenter tip: Use full extension telescopic channels on the drawers, since boys pull drawers all the way out and drop them.

Boy kids almirah design in teak veneer with rounded corners and sky blue inside

A two door almirah in teak veneer with a sky blue back panel inside, so it looks warm outside and fun when opened. Rounded corners keep it safe in a small room.

  • MaterialBWR ply, teak veneer
  • Size3 x 6 ft, 20 in deep
  • FitsSmall boys room

Carpenter tip: Seal the veneer with a matte PU clear coat, which resists scratches and water much better than wax polish.

Kids bedroom wardrobe design for a teen boy in grey and mustard with cork

Grey shutters with one mustard door and a plain cork panel on the side for timetables and notes. A clean look that a teen boy will not find childish.

  • MaterialBWR ply, grey laminate
  • Size6 x 7 ft + cork panel
  • FitsTeen room, 11 x 12 ft

Carpenter tip: Glue the cork onto a separate ply panel and screw it on, so it can be replaced when it gets worn.

Kids Almirah Design with Study Table or Bed

In small flats a children bedroom wardrobe design often shares the wall with a desk or a bunk bed. One built-in unit saves floor space and looks neat.

Kids wardrobe design with study table between two tall oak laminate units and a bridge shelf

Two tall wardrobes flank a 4 ft study table, with a bridge shelf above for books. It fits clothes, school things and a desk on one 9 ft wall.

  • MaterialBWR ply, oak laminate
  • Size9 x 7 ft wall unit
  • FitsKids room, 9 ft wall

Carpenter tip: Keep the desk top at 28 in for younger kids and add a raised footrest rather than a lower top later.

Children bedroom wardrobe design built with a bunk bed and storage drawers in the stairs

A bunk bed with a wardrobe at its foot and drawers built into each stair step. Two children get two beds and full storage in a 10 x 10 ft room.

  • MaterialBWP ply, white and ash
  • Size7 x 6.5 ft, 2 beds
  • FitsShared 10 x 10 ft room

Carpenter tip: Make each step at least 9 in deep with a grab handle, and fix the top bunk guard rail 6 in above the mattress.

Baby almirah design in white with a changing top, drawers and a short hanging space

A low almirah with a padded changing top, three drawers and a short hanging space for tiny clothes. Remove the changing tray later and it becomes a chest of drawers.

  • MaterialBWR ply, white PU
  • Size3.5 x 3.5 ft, 22 in deep
  • FitsNursery or parents room

Carpenter tip: Add a 3 in raised rim on three sides of the changing top and strap the unit to the wall so it cannot tip forward.

Safety Checklist for a Kids Almirah

  • Anti-tip bracket: kids climb shelves, so every tall unit gets a metal strap screwed into the brick wall.
  • Soft-close hinges and channels: doors close slowly and do not crush fingers.
  • Rounded edges: ask for 3 to 6 mm rounded edges and PVC edge banding on all board edges.
  • No loose glass: use a mirror with ply backing or acrylic mirror sheet, and skip glass shutters.
  • Low finish smell: laminate is the safest. Let PU paint air out for a week or two.
  • No key locks inside: a child should never be able to lock a door from inside.

Laminate beats acrylic in a kids room because it does not scratch as easily. Browse colour options on our wardrobe laminate design page.

Colours and Finishes That Last

Avoid cartoon prints and stickers on shutters. Children outgrow them in two years, and changing a laminate means new shutters. Instead, use one soft colour with white or wood, and let bedding, cushions and soft toys carry the theme.

Matte laminate hides finger marks best. Wood grain laminate or teak veneer on a boy kids almirah design takes knocks without showing them. If space is tight, consider a bed with storage under it from our box bed designs so the wardrobe can stay smaller.

Questions people ask

What is the best size for a kids wardrobe design?

A 4 to 5 ft wide, 7 ft high wardrobe with 22 in depth suits most kids rooms. Add a loft on a 10 ft ceiling for seasonal clothes. Keep the hanging rail low at first and move it up later.

Which colour is best for kids wardrobe design for girls?

Soft blush pink, peach, lilac and mint all work well with white. Pick a muted shade over a bright one, so the wardrobe still suits her as a teenager. Gold or brass handles add a grown up feel.

Is a sliding wardrobe safe for a kids room?

Yes, if the track is soft-close with end stoppers and the doors are not glass. Sliding doors save swing space in a narrow room. See more ideas on our sliding wardrobe design page.

Which board is best for a kids almirah design?

For a kids room, laminate over BWR plywood gives the best mix of strength and easy cleaning. MDF is fine for painted or fluted shutters but keep it away from damp walls. Avoid particle board, as screws loosen when kids pull doors hard.

Can a baby almirah design be used later for an older child?

Yes, if you plan it that way. A low almirah with drawers becomes a chest of drawers once you remove the changing top. A full height wardrobe with movable rails works from birth to teen years.

Should a kids wardrobe have a lock?

Do not fit locks on the inside or on lower shutters. A single lock on the loft or one top shutter is fine for documents and medicines. Keep keys away from children.

Keep browsing