TV Unit with Mandir Design: Hall Units, Wardrobes and Pooja Almirahs
14 designs TV units Checked 9 Oct 2026
A TV unit with mandir design suits flats where there is no space for a separate pooja room. One wooden wall holds the TV, the cable duct and a small mandir, so the hall stays neat and every family member has a fixed place to pray.
The trick is separation. The mandir sits a little higher than the TV, behind a jali or glass partition, with its own light and its own switch. The diya shelf gets a heat-safe lining, and the niche gets air holes so smoke and heat do not stain the top. Every design below is shown empty inside, so you can plan the woodwork first and arrange your own pooja items later.
We also cover wardrobes with a mandir for bedrooms and freestanding pooja almirahs for rented homes. For plain TV walls without a mandir, see our TV unit design gallery.
Main Hall TV Unit with Mandir Design
These full wall units suit a hall wall of 9 to 12 ft. The TV takes the larger panel and the mandir gets a raised niche on one side, kept apart by a jali, a glass sheet or a solid wooden fin.

A teak veneer wall with the TV on the left and a raised mandir niche on the right, closed by two CNC jali shutters. The jali lets diya smoke escape and hides the niche when guests watch TV.
- MaterialBWR ply, teak veneer
- Size11 ft wide, 8 ft high
- FitsHall, 12 ft wall
Carpenter tip: Cut the jali from 12 mm MDF and PU paint it, because a veneer jali splits at the thin bridges.

White PU panels keep the hall bright, and a fluted glass partition stands between the TV and the mandir. The glass gives a soft view of the diya light without a direct line from the screen.
- MaterialMDF on ply, white PU
- Size10 ft wide, 7.5 ft high
- FitsHall, 10 x 14 ft
Carpenter tip: Fix the 8 mm toughened fluted glass in a grooved wooden frame with silicone, not with clips that rattle.

A walnut laminate TV wall with a tall mandir tower at one end. The niche sits at standing height, with two drawers below it for diya wicks, matchboxes and incense, so nothing for pooja lands in the TV console.
- MaterialBWR ply, walnut laminate
- Size9 ft wide, 7 ft high
- Fits2 BHK hall, 9 ft wall
Carpenter tip: Give the mandir drawers their own soft-close channels and keep the TV wires out of that tower completely.

A solid sheesham console with an arched mandir shelf fixed to the wall beside the TV. The honey polish suits homes with older wooden furniture, and the arch frames the niche without any carving on it.
- MaterialSheesham, honey polish
- Size8 ft console, 16 in high
- FitsHall, 8 to 9 ft wall
Carpenter tip: Season the sheesham well and leave a 2 mm gap at panel joints so the arch does not crack in winter.
TV Unit and Mandir Design Side by Side
When the TV wall is short, a separate mandir box beside the TV unit works better than one long panel. Each piece gets its own light and switch, and you can move them when you shift house.

A light oak TV panel with a separate floating mandir box hung a little higher on the same wall. A plain wooden fin between them stops the TV glow from falling on the diya shelf.
- MaterialBWR ply, oak laminate
- Size6 ft panel + 2 ft box
- FitsSmall hall, 8 ft wall
Carpenter tip: Hang the mandir box on a hidden French cleat screwed into the brick, never on the TV panel itself.

A grey laminate TV panel paired with a mango wood mandir that has a small door below for the pooja thali. The warm wood and the cool grey keep the two areas clearly apart.
- MaterialMango wood, clear polish
- Size2 x 3.5 ft mandir
- FitsHall corner, 7 ft wall
Carpenter tip: Get the mango planks treated against borers, then seal the back face too, since it sits close to a damp outer wall.

The mandir takes the corner and the TV console runs along the main wall, so they never share one panel. A triangle mandir uses dead space that a normal unit would waste.
- MaterialBWP ply, cream acrylic
- Size2.5 ft corner, 6 ft TV
- FitsHall with free corner
Carpenter tip: Use BWP ply for the corner base, as corners near a window catch rain splash and stay damp longest.

This TV unit with temple design pairs a sagwan cabinet, carved with simple flowers on its doors, with a plain teak finish TV wall. The carving stays on the mandir only, so the TV side looks calm and clean.
- MaterialSagwan, natural polish
- Size2.5 x 6 ft cabinet
- FitsLarge hall, 12 ft wall
Carpenter tip: Keep carving shallow, about 4 to 5 mm, so dust wipes off easily with a soft brush every week.
Wardrobe with Mandir Design and Wardrobe with Temple Design
A wardrobe with mandir design puts a pooja niche into one shutter bay of a bedroom or living room wardrobe. It needs its own doors, a lined base and air holes, because clothes and diya heat must never share a closed box. See our wardrobe design page for the clothes side.

A four door bedroom wardrobe with the middle bay turned into a mandir behind jali shutters. Clothes sit on both sides in fully closed sections with solid walls.
- MaterialBWR ply, ivory laminate
- Size8 ft x 7 ft + loft
- FitsMaster bedroom
Carpenter tip: Make the mandir bay sides from 18 mm ply with no gaps, so smoke never reaches the clothes next door.

A sliding wardrobe with a small mandir section at one end on hinged doors. The diya rests on a pull-out shelf topped with marble, so the flame stays outside the cabinet while you pray.
- MaterialBWR ply, taupe laminate
- Size7 ft wide, 7 ft high
- FitsBedroom, 11 x 12 ft
Carpenter tip: Fit a full extension channel rated for 25 kg under the marble pull-out shelf.

A living room wardrobe for linen and extra bedding, with one bay given to a temple niche behind clear glass doors. The glass keeps dust out while the brass items stay visible.
- MaterialBWR ply, oak veneer
- Size6 ft wide, 7 ft high
- FitsHall or dining area
Carpenter tip: Drill a row of 10 mm air holes along the top of the glass bay and cover them with brass mesh.
Pooja Almirah Design and Mandir Almirah Design
A pooja almirah is a freestanding wooden cabinet with a mandir at the top and drawers or doors below. It suits rented flats, since it moves with you and needs no wall drilling beyond one safety bracket.

A sheesham pooja almirah with folding doors that open flat against the sides, and two drawers below. When closed it looks like a neat cabinet in the hall.
- MaterialSheesham, walnut polish
- Size2.5 x 5.5 ft, 18 in deep
- FitsRented flat, hall
Carpenter tip: Use piano hinges on the folding doors so they hang straight and do not sag after a few monsoons.

A slim white PU mandir almirah with three drawers and a brass hook for the bell. It fits a dining area wall and the matte paint hides fingerprints better than gloss.
- MaterialMDF on ply, white PU
- Size2 x 6 ft, 16 in deep
- FitsDining area wall
Carpenter tip: Anchor the top to the wall with an L bracket, because a tall slim almirah tips when drawers open.

A brick wall niche fitted with rubber wood shutters, a granite base and a drawer for pooja items. Building it into the wall saves floor space in a small flat.
- MaterialRubber wood, teak polish
- Size2.5 ft wide niche
- FitsSmall flat, niche wall
Carpenter tip: Seal the cement niche with waterproof primer before fixing wood, or the back panel will swell.
Heat, Ventilation and Wood for a Mandir Unit
The diya shelf is the part that wears out first. Line it with a marble or granite slab, or a removable brass sheet, and keep laminate and acrylic at least 6 in away from the flame. Acrylic and PU can blister with heat, so use them only on doors and sides.
- Air: drill air holes or fit a small jali near the top of the niche so smoke and warm air can leave.
- Doors: light the diya with the shutters open, and close them only after the flame is out.
- Drawers: one shallow drawer of 4 to 6 in for wicks, matchboxes and incense keeps the floor clear.
- Wood: teak or sheesham for solid pieces, BWR ply for built-in walls, BWP ply near windows or damp walls.
Wipe oil drips at once and clean brass items outside the unit. Our wood for furniture guide compares boards, and wooden furniture care explains polishing and spotting termites early.
Questions people ask
How high should a TV unit with mandir design be?
Keep the TV console 16 to 20 in high and the mandir base a little higher than the console. For standing prayer, set the mandir base at 36 to 42 in. Do not place the mandir directly above the TV.
Can I make a main hall TV unit with mandir design in plywood?
Yes. BWR plywood with laminate or veneer works well for a full hall wall. Use a marble or granite slab on the diya shelf, and keep the TV wiring duct away from the mandir side.
Is a wardrobe with temple design safe for clothes?
It is safe if the mandir bay has its own solid side walls, its own shutters and air holes at the top. Light the diya only with the doors open, or use a pull-out marble shelf so the flame stays outside.
Which wood is best for a pooja almirah design?
Teak and sheesham last longest and resist damp. Mango and rubber wood suit budget pieces after anti-borer treatment. Solid wood and carving cost more than plywood with laminate.
How do I separate the TV and mandir in one unit?
Use a jali, a fluted glass partition or a solid wooden fin between them. Give the mandir its own light and switch, and keep it on a separate panel if the wall allows.
What should a mandir almirah design have inside?
A heat-safe base, a shallow drawer for wicks and matchboxes, a hook for the bell and a warm strip light. Leave at least 18 in above the diya flame so the top does not get black.





